• Up to 50% less power consumption compared to storage type heaters
• Hot water instantly
• Exclusive built in scald guard thermostat
• Lower installation costs compared to tank type units

Phase: 1  

• Voltage: 240 V
• Wattage: 9.6 kW
• Amperage: 40 A
• Min. required circuit breaker size: 50 A
• Recommended Wire Size: 8 AWG Copper
• Min. Water Flow to Activate Unit: 0.79 GPM
  
  
• Weight: 5.3 lbs
• Dimensions: 14-3/16" H X 7-7/8" W X 4-1/8" D
• Nominal Water Volume: 0.13 Gal
• Working Pressure: 150 PSI
• Tested to pressure: 300 PSI
• Water Connections: 1/2" NPT

The Stiebel Eltron DHC tankless water heaters are designed for installation at the point of use. They heat water instantaneously as it flows through the unit. Stand-by losses are completely eliminated.

The heating elements are controlled by a flow switch and by an exclusive scald-guard thermostat, which keeps the water temperature within safe limits at all times. In addition, the DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.

The models DHC 3-1, DHC 3-2 and DHC 4-2 are shipped with 0.5 GPM pressure compensating flow reducer / aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters.

• Office Buildings
• Gas Stations
• Stores
• Schools
• Malls
• Hotels / Motels
• Warehouses
• Commercial Condominiums
• Restaurants
• Manufacturing Facilities

• Bathroom Sinks
• Kitchen Sinks
• Laundry Areas
• Small Cabins
• Boats / RVs