Lake County Pipe and Supply - RIDGID PROPRESS 100B ONSALE ONLINE

Propress tools: Every day there are more and more professionals around the world who take advantage of the ProPress-System! Finally a reliable way to improve the quality of a piping job. At the same time this amazing product allows you to stick with the best material ever invented: copper! But here is the best part for the professional pipe-fitter:

Ridgid ProPress significantly increases efficiency and profitability! You save precious time and you make more money!

Fast and Easy to Use
One squeeze of the trigger makes the connection on any size tubing in about 4-6 seconds. Compare to soldering and you’ll see the savings.
Flameless
No flame means less chance for heat damage. You can even join wet tube making it ideal for service.
Versatility
ProPress tools can be used virtually anywhere – in commercial, industrial and residential applications, for both new installations and rehab work.
Permanent Watertight Seal
The system provides a strong, reliable, watertight seal. The high-strength connection, installed properly, will last the life of the tubing system and more! You can forget about leaks - there won't be any. And that's guaranteed!
Wide Capacity
ProPress is designed to handle tubing in sizes ranging from 1/2" to 4" in diameter. You can easily switch from one size to another, in about ten seconds, simply by changing the jaws or rings.

Large Selection of Fittings
There are more than 240 different engineered fittings available in a variety of configurations and sizes.
Professional Appearance
Because there is no buildup of solder or tarnish, ProPress connections have a more professional look.
Less Equipment
With ProPress tools, there is no need to buy or carry expensive, cumbersome equipment such as tanks and hoses, and no need for supplies like solder and flux.
Environmentally Friendly
There is no solder or flux used with ProPress, so there’s no chance of contaminating the environment.
Meets Codes and Standards
ProPress meets the most rigorous testing standards and codes in Europe, the U.S. and Canada. The system is certified and approved by institutions ranging from professional associations to government standards bureaus like CSA.
Proven Technology Used Worldwide
ProPress has been in use for years in Europe and other parts of the world. To the professionals who use it every day, it is a proven technology that is preferred over soldering.

Thousands of contractors in the U.S. and Canada are already using ProPress. Ask them why and they'll tell you that, of its numerous advantages, the ability to install better connections in a faster more profitable way is what drew them to the System. Because it eliminates several steps, ProPress can be installed in one-third to one-half less time that is required to solder!

Answers to using Ridgid ProPress with certain Chemicals & Applications:

Yes: Hot Water (up to 250°F)
Yes: Chilled Water (0°F to 250°F)
Yes: Water Glycol Mixture (Approved Glycols: Ethylene, Propylene, Butylene-Glycol – up to 100% Glycol Concentration)
Yes: Air (cleaned, dried, filtered)
Yes: Vacuum (Yes, as documented in the NSF report)
Yes: Steam (max. Working Pressure 35 psi)
Yes: Oxygen (note: Oxygen for Medical Gas Applications – NO)
Yes: Nitrogen (max. working Pressure 140 psi)
Yes: Argon (max. working Pressure 140 psi)
Yes: NEW! ProPress G - Natural Gas, LP-Gas, Fuel Oil...
No: Fire Protection Systems (being worked on)
No: Medical Gas (being worked on)
No: Refrigerants (not supported at this time, but may in the future)
No: DWV Pipe